Thiết Bị Mạng
Router Mikrotik
Thiết Bị An Ninh
Camera Tiany
Thiết Bị Văn Phòng
Tổng Đài Grandstream
Điện thoại Grandstream
Máy chủ – Server
Máy Tính
Phần Mềm Bản Quyền
Âm Thanh ITC
Switch Cisco C1200-8T-E-2G-EU
(Chưa bao gồm VAT)
Switch Cisco C1200-8T-E-2G-EU
– Switch Cisco Catalyst C1200-8T-E-2G-EU 10-Ports GE
– Tốc độ LAN: Gigabit (1000Mbps)
– Cổng kết nối: 8-ports RJ45, 2x Combo ports (RJ-45 + SFP)
– Kiểu switch: Switch Rack-mountable Gigabit Ethernet (1000Mbps)
– Tản nhiệt: không quạt tự làm mát
– Khả năng chuyển mạch: 20 Gbps
– Khả năng chuyển tiếp gói tin: 14.88 mpps
– Quản trị switch: CLi Console RJ45/ USB type C Ports, giao diện web, App mobile
Switch Cisco C1200-8T-E-2G-EU
Cisco C1200-8T-E-2G-EU với 8 cổng Gigabit RJ-45 và 2 cổng Gigabit copper/SFP chạy combo mang tới khả năng kết nối mạng linh hoạt mạnh mẽ. Switch thuộc dòng chuyển mạch Catalyst 1200 thế hệ mới của Cisco cung cấp đầy đủ tính năng cần có, phù hợp với nhu cầu kinh doanh của các văn phòng nhỏ, các phòng ban,… cần tiết kiệm chi phí.
Tin cậy dễ sử dụng và giá cả phải chăng
Một thiết bị chuyển mạch có giá cả phải chăng luôn được các doanh nghiệp ưu tiên hàng đầu, trong khi hoạt động quản lý và vận hành liên tục làm tăng thêm sự phức tạp cần có thời gian và nguồn lực. Chính vì vậy Cisco đã tung ra thị trường sản phẩm C1200-8T-E-2G-EU làm thỏa mãn hầu hết nhu cầu cảu các doanh nghiệp vừa và nhỏ. Nó có đầy đủ các tính năng hiện đại, tin cậy, bảo mật và được quản lý dễ dàng.
Các tính năng mới và lợi ích mang lại
Switch Cisco C1200-8T-E-2G-EU cung cấp tất cả các tính năng cần có để xây dựng một mạng cấp doanh nghiệp cơ bản với mức chi phí đầu tư vô cùng hợp lý. Những tính năng này bao gồm:
Dễ dàng cấu hình và quản lý: Switch Cisco C1200-8T-E-2G-EU kết nối các ứng dụng Cloud giúp đồng bộ hẹ thống và thông qua bảng điều khiển trên giao diện web hoặc trên App mobile công việc của các quản trị viên hệ thống thật sự dễ dàng hơn bao giờ hết.
Hiệu suất mạnh mẽ, tin cậy: Switch Cisco C1200-8T-E-2G-EU có cấu hình mạnh mẽ mang tới hiệu suất cao giúp tăng tốc thời gian truyền tệp, cải thiện tình trạng mạng chậm và ì ạch, giúp các ứng dụng kinh doanh quan trọng của bạn luôn sẵn sàng và giúp nhân viên của bạn phản hồi nhanh hơn với nahu và với khách hàng.
Routing Layer 3: Switch Cisco C1200-8T-E-2G-EU Đây là tính năng này cho phép bạn phân đoạn mạng của mình thành các nhóm làm việc riêng biệt và giao tiếp qua các VLAN mà không làm giảm hiệu suất của ứng dụng. Do đó, bạn có thể quản lý định tuyến nội bộ bằng bộ chuyển mạch của mình và dành bộ định tuyến của bạn cho lưu lượng truy cập bên ngoài và bảo mật, giúp mạng của bạn hoạt động hiệu quả hơn.
Bảo mật mạng: Switch Cisco C1200-8T-E-2G-EU Switch tích hợp bảo mật mạng để giảm nguy cơ tấn công, với bảo mật cổng IEEE 802.1X để kiểm soát quyền truy cập vào mạng của bạn, ngăn chặn tấn công từ chối dịch vụ (DoS) và Kiểm soát truy cập mở rộng Danh sách (ACL) để bảo vệ các phần nhạy cảm của mạng khỏi người dùng trái phép và bảo vệ chống lại các cuộc tấn công mạng.
Thiết kế linh hoạt và nhỏ gọn: Switch Cisco C1200-8T-E-2G-EU Tuy là switch bắt rack nhưng C1200-8T-E-2G-EU có thiết kế không quạt khá nhỏ gọn có thể dễ dàng lắp đặt trong tủ mạng hoặc vị trí khác mà không làm ảnh hưởng tới không gian. Ngoài ra Switch còn được trang bị 2 cổng combo chạy RJ45 hoặc SFP Uplink nên có thể dễ dàng mở rộng và nâng cấp kết nối mạng.
Thông số kỹ thuật Switch Cisco C1200-8T-E-2G-EU
| Data sheet Switch C1200-8T-E-2G-EU | |
| Product specifications | |
| Model | C1200-8T-E-2G |
| Performance Switch Cisco C1200-8T-E-2G-EU | |
| Capacity in millions of packets per second (mpps) (64-byte packets) | 14.88 |
| Switching capacity in gigabits per second (Gbps) | 20 |
| Layer 2 switching Switch Cisco C1200-8T-E-2G-EU | |
| Spanning Tree Protocol (STP) | Standard 802.1d spanning tree support Fast convergence using 802.1w (Rapid Spanning Tree Protocol [RSTP]), enabled by default Multiple spanning tree instances using 802.1s (MSTP); 8 instances are supported Per-VLAN Spanning Tree Plus (PVST+); 126 instances are supported Rapid PVST+ (RPVST+); 126 instances are supported |
| Port grouping/link aggregation | Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
● Up to 4 groups |
| VLAN | Support for up to 255 active VLANs simultaneously Port-based and 802.1Q tag-based VLANs Management VLAN Guest VLAN Auto Surveillance VLAN (ASV) |
| Voice VLAN | Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers networkwide zero-touch deployment of voice endpoints and call control devices |
| Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping | Limits bandwidth-intensive multicast traffic to only the requesters; supports 255 multicast groups (source-specific multicasting is also supported) |
| IGMP querier | Used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router |
| Layer 3 routing Switch Cisco C1200-8T-E-2G-EU | |
| IPv4 routing | Wire-speed routing of IPv4 packets Up to 32 static routes and up to 16 IP interfaces |
| IPv6 routing | Wire-speed routing of IPv6 packets |
| Layer 3 interface | Configuration of Layer 3 interface on physical port, LAG, VLAN interface, or loopback interface |
| Classless Interdomain Routing (CIDR) | Support for CIDR |
| Dynamic Host Configuration Protocol (DHCP) relay at Layer 3 | Relay of DHCP traffic across IP domains |
| User Datagram Protocol (UDP) relay | Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BootP)/DHCP packets |
| Security Switch Cisco C1200-8T-E-2G-EU | |
| Secure Sockets Layer (SSL) | Encrypts all HTTPS traffic, allowing secure access to the browser-based management GUI in the switch |
| SSH Protocol | SSH is a secure replacement for Telnet traffic. Secure Copy (SCP) also uses SSH. SSH v1 and v2 are supported. |
| IEEE 802.1X (authenticator role) | RADIUS authentication, guest VLAN, single/multiple host mode, and single/multiple sessions |
| STP loopback guard | Provides additional protection against Layer 2 forwarding loops (STP loops) |
| Secure Core Technology (SCT) | Ensures that the switch will receive and process management and protocol traffic no matter how much traffic is received |
| Secure Sensitive Data (SSD) | A mechanism to manage sensitive data (such as passwords, keys, and so on) securely on the switch, populating this data to other devices and a secure auto-configuration. Access to view the sensitive data as plain text or encrypted is provided according to the user-configured access level and the access method of the user |
| Trustworthy systems | Trustworthy systems provide a highly secure foundation for Cisco products
Run-time defenses (Executable Space Protection [X-Space], Address Space Layout Randomization [ASLR], Built-In Object Size Checking [BOSC]) |
| Port security | Ability to lock source MAC addresses to ports and limit the number of learned MAC addresses |
| RADIUS | Supports RADIUS authentication for management access. Switch functions as a client |
| Storm control | Broadcast, multicast, and unknown unicast |
| DoS prevention | DoS attack prevention |
| Multiple user privilege levels in CLI | Level 1, 7, and 15 privilege levels |
| ACLs | Support for up to 512 rules Drop or rate limit based on source and destination MAC, VLAN ID, IPv4 or IPv6 address, IPv6 flow label, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, TCP/UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag; ACL can be applied on both ingress and egress sides Time-based ACLs supported |
| Quality of service Switch Cisco C1200-8T-E-2G-EU | |
| Priority levels | 8 hardware queues |
| Scheduling | Strict priority and Weighted Round-Robin (WRR) queue assignment based on DSCP and Class of Service (802.1p/CoS) |
| Class of service | Port based, 802.1p VLAN priority based, IPv4/v6 IP precedence/Type of Service (ToS)/DSCP based, Differentiated Services (DiffServ), classification and re-marking ACLs, trusted QoS |
| Rate limiting | Ingress policer, egress shaping and rate control per VLAN, per port, and flow based |
| Congestion avoidance | A TCP congestion avoidance algorithm is required to reduce and prevent global TCP loss synchronization |
| Standards | |
| IPv6 | |
| IPv6 | IPv6 host mode IPv6 over Ethernet Dual IPv6/IPv4 stack IPv6 Neighbor Discovery (ND) IPv6 stateless address auto-configuration Path Maximum Transmission Unit (MTU) discovery Duplicate Address Detection (DAD) ICMP version 6 IPv6 over IPv4 network with Intrasite Automatic Tunnel Addressing Protocol (ISATAP) support USGv6 and IPv6 Gold Logo certified |
| IPv6 QoS | Prioritizes IPv6 packets in hardware |
| IPv6 ACL | Drop or rate-limit IPv6 packets in hardware |
| Multicast Listener Discovery (MLD v1/2) snooping | Delivers IPv6 multicast packets only to the required receivers |
| IPv6 applications | Web/SSL, Telnet server/SSH, Ping, Traceroute, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), Simple Network Management Protocol (SNMP), RADIUS, Syslog, DNS client, DHCP client, DHCP auto-configuration |
| IPv6 RFCs supported | RFC 4443 (which obsoletes RFC 2463): ICMPv6 RFC 4291 (which obsoletes RFC 3513): IPv6 address architecture RFC 4291: IPv6 addressing architecture RFC 2460: IPv6 specification RFC 4861 (which obsoletes RFC 2461): neighbor discovery for IPv6 RFC 4862 (which obsoletes RFC 2462): IPv6 stateless address auto-configuration RFC 1981: path MTU discovery RFC 4007: IPv6 scoped address architecture RFC 3484: default address selection mechanism RFC 5214 (which obsoletes RFC 4214): ISATAP tunneling RFC 4293: MIB IPv6: textual conventions and general group RFC 3595: textual conventions for IPv6 flow label |
| Management Switch Cisco C1200-8T-E-2G-EU | |
| Cisco Business Dashboard | Support for embedded probe for Cisco Business Dashboard running on the switch. Eliminates the need to set up a separate hardware or virtual machine for the Cisco Business Dashboard probe onsite |
| Cisco Business mobile app | Mobile app for Cisco Business switch and wireless products. Helps to set up a local network in minutes and provide easy management at your fingertips. |
| Cisco Network Plug and Play (PnP) agent | The Cisco Network PnP solution provides a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or for provisioning updates to an existing network. The solution provides a unified approach to provision Cisco routers, switches, and wireless devices with a near-zero-touch deployment experience.
Supports Cisco PnP Connect |
| Web user interface | Built-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports configuration, wizards, system dashboard, system maintenance, and monitoring. Basic and advanced mode for maximum operational efficiency |
| SNMP | SNMP versions 1, 2c, and 3 with support for traps, and SNMP v3 User-Based Security Model (USM) |
| Remote Monitoring (RMON) | Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis |
| IPv4 and IPv6 dual stack | Coexistence of both protocol stacks to ease migration |
| Firmware upgrade | Web browser upgrade (HTTP/HTTPS) and TFTP and upgrade over SCP running over SSH Dual images for resilient firmware upgrades |
| Port mirroring | Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 4 source ports can be mirrored to one destination port |
| VLAN mirroring | Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 4 source VLANs can be mirrored to one destination port |
| DHCP (options 12, 59, 60, 66, 67, 125, 129, and 150) | DHCP options facilitate tighter control from a central point (DHCP server) to obtain IP address, auto-configuration (with configuration and image file download), DHCP relay, and hostname |
| Secure Copy (SCP) | Securely transfers files to and from the switch |
| Auto-configuration with SCP file download | Enables mass deployment with protection of sensitive data |
| Text-editable configurations | Configuration files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment |
| Smartports | Simplified configuration of QoS and security capabilities |
| Auto Smartports | Automatically applies the intelligence delivered through the Smartports roles to the port based on the devices discovered over Cisco Discovery Protocol or LLDP-MED. This facilitates zero-touch deployments |
| Text view CLI | Scriptable CLI. A full CLI as well as a menu-based CLI is supported. User privilege levels 1, 7, and 15 are supported for the CLI |
| Localization | Localization of GUI and documentation into multiple languages |
| Login banner | Configurable multiple banners for web as well as CLI |
| Other management | Traceroute, single IP management, HTTP/HTTPS, RADIUS, port mirroring, TFTP upgrade, DHCP client, SNTP, cable diagnostics, Ping, syslog, Telnet client (SSH secure support), automatic time settings from management station |
| Green (power efficiency) | Automatically turns power off on an RJ-45 port when the detecting link down. Active mode is resumed without loss of any packets when the switch detects the link is up |
| Cable length detection | Adjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables |
| EEE compliant (802.3az) | Supports IEEE 802.3az on all copper Gigabit Ethernet ports |
| Disable port LEDs | LEDs can be manually turned off to save energy |
| Time-based port operation | Link up or down based on user-defined schedule (when the port is administratively up) |
| Time-based PoE | PoE power can be on or off based on user-defined schedule to save energy |
| Perpetual PoE | Provides PoE power to connected powered devices while the device is rebooting |
| General Switch Cisco C1200-8T-E-2G-EU | |
| Jumbo frames | Frame sizes up to 9000 bytes. The default MTU is 2000 bytes |
| MAC table | 8000 addresses |
| Dying gasp | Upon power loss/failure the switch can withstand >= 16 ms on detecting a 12V input drop |
| Chip guard | Detects tampering attempts and responds during boot-up |
| Boot integrity | Boot integrity visibility allows Cisco’s platform identity and software integrity information to be visible and actionable |
| Discovery Switch Cisco C1200-8T-E-2G-EU | |
| Bonjour | The switch advertises itself using the Bonjour protocol |
| Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP-Media Endpoint Discovery (MED) extensions | LLDP allows the switch to advertise its identification, configuration, and capabilities to neighboring devices that store the data in a MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones |
| Cisco Discovery Protocol | The switch advertises itself using the Cisco Discovery Protocol. It also learns the connected device and its characteristics using Cisco Discovery Protocol |
| Hardware Switch Cisco C1200-8T-E-2G-EU | |
| Power consumption (worst case) | |
| System power consumption | 110V=12.55W 220V=12.56W |
| Power consumption (with PoE) | – |
| Heat dissipation (BTU/hr) | 42.86 |
| Ports Switch Cisco C1200-8T-E-2G-EU | |
| RJ-45 ports | 8x 10/100/1000 ports 2x 1Gigabit copper/SFP combo ports |
| Console port | Cisco Standard RJ-45 console and USB Type C port |
| Buttons | Reset button |
| Cabling type | Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T |
| LEDs | System, Link/Act, PoE, Speed |
| Flash | 512 MB |
| CPU | Dual-core ARM at 1.4 GHz |
| DRAM | 1 GB DDR4 |
| Packet buffer | 1.5 MB |
| Environmental | |
| Unit dimensions (W x D x H) | 268 x 185 x 44 mm (10.56 x 7.28 x 1.73 in) |
| Unit weight | 1.39 kg (3.06 lb) |
| Power | 100 to 240V 50 to 60 Hz |
| Certifications | UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A |
| Operating temperature | 23° to 122°F (-5° to 50°C) for other models |
| Storage temperature | -13° to 158°F (-25° to 70°C) |
| Operating humidity | 10% to 90%, relative, noncondensing |
| Storage humidity | 10% to 90%, relative, noncondensing |
| Fan (number) | Fanless |
| MTBF at 25°C (hours) | 2,171,669 |
Sản phẩm tương tự
